CARAVAN TANK
CYLINDER TANKS(SC01)
EXTERNAL TOROIDAL TANK(EXT)(ST02)
INTERNAL TOROIDAL TANK(INT)(ST01)
LIQUID INTERNAL TOROIDAL TANK
LIQUID ULTRA TOROIDAL TANKS(CF)
MOTORCYLE TANK
ULTRA TOROIDAL TANK(ULT)(ST03)
01.
Cutting
All steel sheet parts and the tubes in the middele of the tanks are cut using the guillotine Shears, Press and Roller cutters in accordance with the prepared work orders and tachnical drawings.
02.
Cold Forming
The parts which are cut are worked in tha hydraulic presses in accordance with the job orders and technical drawing and put into suitable forms to make a cylinder body by usıng the cylinder spinning machines.
03.
Assembling Using Welding
The semi-produced parts which are cut and put into form after the cold forming process are assembled using the PLC controlled arc welding and MIG/MG welding machines in accordance with the job orders and technical drawings.
04.
Hydro Test
All of the tanks which are assembled using the welding (100%) are subjected to 30 bar pressure testing in the automatic and calibrated test unist which can be monitored with the monometers.
05.
Sand Blasting and Painting
After the hydro-testing, the tanks are initially subjected to surface preparation process (sand blasting).
06.
Packing Storing Dispatching
The products which are painted are stocked up in the depot by packing them with their spares needed for assembling and their warranty certificates with nylon packingand carton boxes.
